| FLOOR
SUPPORTS |
 |
| MS Type floor
supports are available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every bed joint
and ends of conveyor. Holes in feet for lagging to floor. Knee
braces recommended above MS-6 support. |
| CONVEYING
SPEED |
|
| Other
constant and variable speeds available. V-belt drive supplied on
speeds under 17 FPM. Capacity affected with speed change. |
|
CENTER DRIVE |
|
| Provides 16
in. of belt take-up. Minimum elevation 16 in. with 4 in. drive, 17
in. with 8 in. drive. Specify location. Minimum OAL without
modification–63 in. with 4 in. drive, 66 in. with 8 in. drive |
|
PACKAGE STOPS |
|
| Hand
operated blade or roller, air operated blade or roller, angle and
raised roller end stops. |
|
POLY-TIER SUPPORTS |
|
| 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
GUARD RAILS |
|
| Continuous
adjustable channel, fixed channel or type A angle, elevated to allow
for pop-out tread rollers. Fixed channel overlapping, one direction.
Fixed channel non-overlapping, reversing with channels raised with
spacers to allow for pop-out tread rollers. |
| CEILING
HANGERS |
|
5/8 in. dia.
x 8 ft. long unplated rods fully threaded.
Other lengths and galvanized rods available. |
| MOTORS |
|
| Energy efficient,
single phase other characteristics. 2 HP maximum. |
| ELECTRICAL
CONTROLS |
|
| Many common
electrical controls are available. These items include: One direction
manual start switch, reverse drum switch, non-reversing and reversible
magnetic starters, push button stations, AC variable frequency drives.
Look for these components in the ELECTRICAL Category. |
|
