| FLOOR
SUPPORTS |
 |
| MS Type floor
supports are available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every bed joint
and ends of conveyor. Holes in feet for lagging to floor. Knee braces
recommended above MS-6 support. |
| BELT |
|
| Brown Polymate
Roughtop w/Nitrile cover, Pure Gum Rubber Roughtop. |
| BELT
SPEED |
|
| Other constant
and variable speeds V-belt drive supplied on speeds under 20 FPM (1
HP)–46 FPM (2 HP). NOTE: Capacity affected with speed
change. |
|
| GUARD
RAILS |
|
| Continuous
adjustable channel, overlapping fixed channel (one direction), non-overlapping
fixed channel (bi-directional). |
| CEILING
HANGERS |
|
| 5/8 in. dia.
x 8 ft. long unplated rods fully threaded. Other lengths and galvanized
rods available. |
| MOTORS |
|
| Energy efficient,
single phase, other characteristics. 2 HP maximum. |
| ELECTRICAL
CONTROLS |
|
| Non-reversing
and reversible magnetic starters and push button stations. AC variable
frequency drive. |
|
