| FLOOR
SUPPORTS |
 |
| LS Type floor
supports are available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every bed joint
and ends of conveyor. Holes in feet for lagging to floor. Knee braces
recommended above LS-6 support. |
| CONVEYING
SPEED |
|
| Other constant
and variable speeds from 30 to 90 FPM. Over 90 FPM contact factory.
Capacity affected with speed change. |
| GUARD
RAILS |
|
| Continuous
adjustable channel, fixed channel or Type A & B angle. NOTE:
If product comes in contact with guard rails, product flow will
be affected. Fixed channel overlapping, one direction.
Fixed channel non-overlapping, reversing. |
| CASTERS |
|
| Support casters
are available in 4 In. or 6 In. diameter. Casters are available in
with Steel or Rubber wheels and can be supplied with wheel brakes. |
|
| POLY-TIER
SUPPORTS |
|
| 36 in. to 120
in. support heights in 6 in. increments. Knee braces supplied. |
| CEILING
HANGERS |
|
5/8 in. Dia.
x 8 ft. long unplated rods fully
threaded. Other lengths and galvanized rods available. |
| MOTORS |
|
| Energy efficient,
single phase other characteristics. 1-1/2 HP maximum. |
| ELECTRICAL
CONTROLS |
|
| Many common
electrical controls are available. These items include: One direction
manual start switch, reverse drum switch, non-reversing and reversible
magnetic starters, push button stations, AC variable frequency drives.
Look for these components in the ELECTRICAL Category. |
|
